How to Order Our Products:

Request A Quote

Email Us

Or Call


We accept payment by credit card or PayPal

“Copyright 2017 Valon Technology, LLC - All Rights Reserved


The Valon 3010 accepts a wide range of input frequencies and provides three independent, user-selectable, divided outputs. The 3010 is useful for extending the low-frequency range of any signal source down to 5MHz as a 50Ω output or down to 0Hz as a TTL output.

The sixteen available output division ratios are set by the user with hardware jumpers. The division ratios available are: 1,2,3,4,5,6,8,9,10,12,15,16,18,24,30,32. The divide-by-1 setting is useful for buffering and squaring a low-level RF signal. The two 50Ω outputs and the TTL output can be independently programmed to any of the divider ratios. The third divider output also drives a cascade of 4 divide-by-two stages providing an additional divide by 2,4,8,16 and overall maximum divide by 512.  

The Valon 3010 divider module is designed to be an easily integratable component into any RF or digital system. The only external requirement is a modest dc power source and input signal.

The Valon 3010 is housed in a CNC machined housing for enhanced EMC/EMI protections.   

Requires 4~7V at 150mA

Includes 20" dc power cable

3010 Programmable Frequency Divider

  • 5MHz to 2GHz  input
  • Accepts input signal <-30dBm
  • 50Ω RF outputs
  • Multiple 3.3V CMOS TTL compatible outputs
  • TTL division ratios down to 512 available
  • Rugged milled aluminum housing
  • RFI shielded construction
  • EMI/EMC enhanced circuitry
  • ESD protected
  • Suitable for frequency synthesis, clock division, clock distribution in electro-optics, molecular spectroscopy, particle physics, and general lab use.

$279 plus shipping

Accessories for 3010 Programmable Frequency Divider

10-position TTL output cable assembly

(Wire colors may vary from photo)

$12.00 per kit

TTL-1 Cable Kit

MKT-2 Mounting Kit

Picture Coming


Kit includes:

#4-40 x 5/16” mounting screws

#4-40 x 7/16” mounting screws


$4.00 per kit

Don't have a power supply for your Valon product?  

Don't want to tie up a bench supply?  

This compact 6Vdc, 1Amp power supply is just the solution for conveniently powering any Valon Technology product including our 3008, 3010, 4002, 5008, and 5009. The kit includes a power supply module and a 2.1mm power jack to screw-terminal adapter.  

Just connect your Valon 2-pin Hirose power cable pig-tails to the screw terminals.  You will need a small screw driver and maybe a wire stripper.  Need another Valon-Hirose power cable?  Just order our 20” dc Power Supply Cable for $6.

Power supply:

100~240Vac 50/60Hz input.  6Vdc @ 1.25A max.  2.1mm power plug.

Power Jack adapter:

2.1mm power jack to screw-clamping yokes. Can accept wire gauge 12-30  so you know the #24 Valon cable will fit.  Terminal spacing is 0.200".  

$19 per kit

PS6V-1 Power Supply Kit

Accessories Page 

Downloads and Links

3010 Specifications

In the News

3010 Programmable Frequency Divider featured in an article by Jack Browne in Microwaves & RF magazine

Deciding Between Mixers and Multipliers/Dividers